Description
Functions
The BELEKTRONIG SAW generator BSG is used to control SAW actuators at professional applications in acoustofluidics. It integrates network analyzer, frequency generator, power amplifier and meter in a compact device. It therefore replaces the cost-intensive and complex setups that have been necessary for SAW actuators so far. The SAW actuators are controlled by a high frequency alternating voltage with variable frequency and amplitude. The optimum excitation frequency is automatically tracked and adjusted in case of deviations.
Additional Functions
A variety of other functions have been implemented specifically for R & D projects in the area of Acoustofluidics. The dual-channel version offers a possibility to synchronize frequency, amplitude, and phase. This allows to easily generate standing waves for acoustic tweezers. The Trigger I/O can be used, for example for controlling external cameras.
Key Features
- Compact, portable device
- Simplifies acoustofluidic experiments (time and cost savings)
- Intuitive operation - even without special knowledge in high-frequency technology
- Frequency range 5 to 215 MHz
- Power range 40 μW to 4 W
- Phase position -180 to +180° adjustable
- Scalar network analyzer (S-parameter) to characterize the SAW actuators
- Automatic tracking of the optimum excitation frequency
- Continuous or pulse operation with variable duty cycle
- Automatic and manual operating modes
- USB interface
- Supplied with PC software, USB driver, LabView VIs
Configurations
SAW Generator BSG | F10 | F20 |
Frequenzy range [MHz] | 5...215 | 5...215 |
Frequency resolution [Hz] | 1 | 1 |
Accuracy of frequency [ppm] | 10 |
10 |
Output power | 40 µW...4 W | 40 µW...4 W |
|S11| | yes | yes |
|S21|, |S12|, |S22| | no | yes |
TECHNIcal Data
Frequency Control
› | Frequency range | 5...215 MHz |
› | Frequency resolution | 1 Hz |
› | Accuracy of frequency | 10 ppm typ. |
› | Re-adjusting of optimal excitation frequency | Fully automatically, re-adjusting-interval adjustable |
› | Scan parameters and scan ranges | Adjustable |
› | Modes of operation of frequency control | (1) Power measurement, output signal switched off (2) Frequency generator (manual mode) (3) Automated detection and re-adjustment of minima/maxima (4) Channel 2 synchronized with channel 1 |
Output power
› | Signal shape | AC, sinusoidal |
› | Power adjustable | 40 µW...4 W at 50 Ω |
› | Pulsed operation (amplitude modulation) | PWM up to 100 Hz Sampling rate adjustable Phase adjustable |
› | Modes of operation of output power | (1) Adjustable on the device panel (2) Adjustable via PC (3) Channel 2 synchronized with channel 1 |
› | Adjustable limits | |
› | Safe against short-circuit power and open-circuit voltage | |
› | Automated switch off in case of errors |
Output Phase
› | Adjustable phase | -180...180° |
Trigger Input and Output
› | 2x Trigger Input | To trigger the output singal by external devices (e.g. via PC) |
› | 2x Trigger Output | For controlling external devices (e.g. cameras) |
Power Measurement, S-Parameter
› | Measurement of the back and forth power wave | |
› | Detection of S-parameters | |S11|, |S21|, |S12|, |S22| |
› | Functionality of a scalar network analyzer | Frequency dependent characterization of the connected device |
Interface
› | USB 2.0 | Including drivers for virtual COM port |
Software Control
› | PC software BSG Soft | Adjust the settings of SAW Generator BSG, continuously characterize and monitor SAW actuators conditions in operation |
› | LabView VIs | |
› | ASCII command set |
Power Supply, Dimensions and Conditions of Operation
› | Power supply | 24 V (maximal 65 W) |
› | Dimensions (L x W x H) | 285 x 250 x 100 mm³ |
› | Weight | ∼3.5 kg |
› | Operating temperature | 10...45°C |
› | Relative humidity | 0...80 %, not condensating |
Scope of delivery
› | SAW Generator BSG | |
› | Power supply | |
› | SMA cable | |
› | Termination resistor | 50 Ω |
› | USB cable | |
› | PC software BSG Soft | Download link |

Suitable Accessories for our Frequency Controllers
Power Combiner / Splitter and matching SMA and trigger cables can be found here.
Our Products in Use
Our solution examples show the diverse possibilities to use our frequency controller.